How to Repair Jewelry by Soldering Rings Together

TNS Diamonds  can be repaired in many ways, including Soldering rings together to prevent them from spinning on your finger. Re-tipping a prong can damage a gemstone. A cutting edge laser welder can repair damaged chain and clasp parts. Whether your jewelry has been dropped or suffered a breakage, a professional repair shop can help. Below, we explore some common causes of broken jewelry and how to fix them yourself.
Soldering rings together prevents a ring from spinning on your finger

Putting solder between two rings is a common service requested for weddings. Soldering keeps the rings aligned and prevents them from spinning on your finger. It also makes it possible to wear only one ring on your finger, especially if you are wearing your engagement ring and your wedding band together. The soldering process involves two simple steps. First, you need to remove the rings from your finger. Then, you must follow the directions on the soldering plate.

The soldering process requires a jeweler to inspect both rings and determine the metals of the ring shanks. After that, the jeweler will need to select a filler with a lower melting point than the metal of the ring shanks. Once the ring has been soldered, the filler metal melts in the joint, thereby joining the two rings. Most soldering is done on the base of the rings, which avoids damaging the stone or setting and ensures that the two rings appear separate.
Re-tipping a prong causes damage to a gemstone

If you've ever heard of re-tipping a prong, then you know what it means. Basically, a prong breaks, and the jeweler re-tippes the gemstone to restore its original position. If the prongs have been damaged or are weak, the gemstone could fall out. To avoid this scenario, consider replacement prongs for your gemstones.

Re-tipping a prong can cause damage to a gemstone. In addition to damaging the gemstone, it can also cause the ring to fall out of place. Prongs should have small notch on their side to hold the gemstone firmly. If the tip is flat and not rounded, it can cause a gemstone to fall out. However, if you are in doubt, you can have the jeweler tighten the prongs to fix the problem.

If you notice a flat prong on your ring, the chances are that it has been damaged by an accident. For  TNS Diamonds , the ring may have smashed into something or collided with a door. The ring may also have worn its head and the prongs may be damaged. However, these are rare cases and should only be addressed by a jewelry expert.
Common causes of a broken chain or clasp

Whether you've been wearing the same necklace for years or bought a new one, the chances of having a broken chain or clasp are fairly high.  TNS Diamonds  and clasps are among the most likely to break due to everyday wear and tear, and even the strongest metal can break under the right circumstances. To repair the damaged jewelry, the best thing to do is to replace the clasp with a new one that is of the same shape and size.

Broken clasps or chains are an obvious sign of a weak chain or clasp. One solution to this problem is to use a safety pin to pry the clasp apart. This will remove any fluff that has gotten caught in the clasp. The pin should then be inserted into the back of the clasp. After removing the fluff, the clasp should move smoothly again. If the clasp is stuck, use clear tape to prevent fluff from coming back.
Using a cutting edge laser welder to repair jewelry

Using a cutting edge laser weld to repair jewelry can dramatically improve your work. This type of tool welds at speeds faster than light and is safe for delicate jewelry pieces. Lasers can also be placed on robots or computer-controlled platforms, allowing for high-volume non-contact manufacturing with little maintenance. In addition to the high-speed benefits, industrial laser systems can benefit jewelry makers in other ways as well. Several companies are dedicated to helping jewelers develop automated processes, fixturing, and process parameters.

There are various laser welders on the market today. The iWeld Jewelers Edition is specifically designed for this industry, with a power output of 125 Joules of Max Pulse Energy (MPE) and an average of 60 Watts. This laser is powerful enough to repair all types of jewelry. In addition to restoring and maintaining vintage jewelry, laser welding allows jewelers to create new, modern pieces of jewelry without causing any damage to the item. The high-powered laser beams are also safe for heat-sensitive items.